 |
| Quantity: | |
|---|---|
19" 42U 600mm Width Data Center Server Rack IT Cabinet 1500KG Loading Capacity Perforated Door with Handle Lock
Feature
1. Single flat mesh front door with hexagonal hole with 78% ventilation rate
2. Split flat mesh rear door with hexagonal hole with 78% ventilation rate
3. Roof top with cable entry plates, The cable access covered with plastic cap(brush panel is optional),OEM according customer requirements.
4. 1500KG-2000KG loading capacity
5. 2 pairs of side panels,Side panel with latches and key lock. Split design (top & bottom) for easy handling and installations.
6. 4 x (19”) vertical mounting rails Meets EIA310 standard compliant 483mm,The U markings are printed on both (front & rear) side on each EIA rails.
7. Adjustable leveling feets and Heavy duty caster
8. 2pcs vertical cable tray- Toolless mounting slots for Vertical PDU/cable manager mounting.
9. Baying kit, 4 pcs (bundled with rack)
10.50 sets of captive M6 nuts and M6 screws
11. Bottom plate (optional cover)
12. Rack base is optional (There is a base to ensure the load and be placed firmly on the raised floor)
Detail Display
 |  |  |
19" 42U 600mm Width Data Center Server Rack IT Cabinet 1500KG Loading Capacity Perforated Door with Handle Lock
Feature
1. Single flat mesh front door with hexagonal hole with 78% ventilation rate
2. Split flat mesh rear door with hexagonal hole with 78% ventilation rate
3. Roof top with cable entry plates, The cable access covered with plastic cap(brush panel is optional),OEM according customer requirements.
4. 1500KG-2000KG loading capacity
5. 2 pairs of side panels,Side panel with latches and key lock. Split design (top & bottom) for easy handling and installations.
6. 4 x (19”) vertical mounting rails Meets EIA310 standard compliant 483mm,The U markings are printed on both (front & rear) side on each EIA rails.
7. Adjustable leveling feets and Heavy duty caster
8. 2pcs vertical cable tray- Toolless mounting slots for Vertical PDU/cable manager mounting.
9. Baying kit, 4 pcs (bundled with rack)
10.50 sets of captive M6 nuts and M6 screws
11. Bottom plate (optional cover)
12. Rack base is optional (There is a base to ensure the load and be placed firmly on the raised floor)
Detail Display
| | |
